|
|
|
|
|
Corodek
The Product
Corodek is custom-length, high tensile steel, corrugated roofing and wall cladding manufactured from .42mm and .48mm B.M.T. (base metal thickness) Colorbond® and Zincalume®. Perfect for traditional residential designs as well as more modern finishes. Also useful in industrial applications. Suited for use as roofing and cladding as well as a variety of other uses including internal walling, ceilings and facades.
(Colorbond® and Zincalume® are registered trademarks of BlueScope Steel Limited)
Minimum Roof Pitch
For roofs with continuous sheets and no end laps the minimum roof pitch is 5° (1 in 12). For roofs with end laps the minimum roof pitch is 200mm for pitches between 5° and 15° and 150mm above 15°. For walls allow maximum end laps of 100mm.
Length
Metroll can supply Corodek sheeting up to a maximum length of 35 meters depending on availability of delivery. Lengths ordered to be manufactured by Metroll should be site measurements, not those taken off plans.
|
 |
|
Trimclad
The Product
Trimclad is custom-length, high tensile steel roofing manufactured from .42mm and .48mm B.M.T. Colorbond® and Zincalume® or Galvanized steel. It is also available as a wall cladding manufactured from .35mm B.M.T. Colorbond® and Zincalume® steel. Trimclad is the most popular industrial roofing and cladding profile. It is also excellent for all residential uses.
(Colorbond® and Zincalume® are registered trademarks of BlueScope Steel Limited)
Minimum Roof Pitch
For roofs with continuous sheets and no end laps the minimum roof pitch is 3º (1 in 20). To prevent ponding from occurring this minimum pitch must be adhered to at all points of the roof. For roofs with end laps the minimum lap is 200mm for pitches between 3º and 15º and 150mm above 15º. For walls allow maximum end laps of 100mm. Prior to fixing, turn top end of sheet up and gutter ends down using the tool available from Metroll.
Length
Metroll can supply Trimclad sheeting up to a maximum length of 35 meters depending on availability of delivery. Lengths to be manufactured by Metroll should be site measurements, not those taken off plans.
|
 |
|
Metlok
The Product
Metlok 500 is custom-length, high tensile steel roofing manufactured from .42mm and .60mm B.M.T. Colorbond® and Zincalume® steel sheet. The hidden fixing system makes it one of the most attractive options to roof, or clad any building. Combined with its tiny minimum roof pitch, Metlok is the ideal choice for large roof spans.
(Colorbond® and Zincalume® are registered trademarks of BlueScope Steel Limited)
Minimum Roof Pitch
For roofs with continuous sheets and no end laps the minimum roof pitch is 1º (1 to 60). To prevent ponding from occurring this minimum pitch must be adhered to at all points of the roof. For roofs with end laps the minimum lap is 200mm for pitches between 5º and 15º and 150mm above 15º. For walls allow maximum end laps of 100mm. End laps in roofs of less than 5º should be sealed with a suitable sealant. The sealant should be in two runs; one at the low end of the lap to prevent moisture being drawn in by capillary action. The other should be at the high end of the lap to prevent condensation that may form under the top sheet, from draining down the underside and entering the lap. Sheets should be laid in the opposite direction to the prevailing weather.
Length
Metroll can supply Metlok 500 sheeting up to a maximum length of 35 meters depending on availability of delivery. Lengths to be manufactured by Metroll should be site measurements, not those taken off plans.
|
 |
|
Metrospan
The Product
Metrospan is a roll formed, custom-length, high tensile steel uniformly profiled roofing and wall sheeting material, manufactured from .42mm and .48mm B.M.T. Colorbond® and Zincalume® or Galvanised steel. Metrospan is ideal for roofing and wall cladding on commercial and industrial buildings, roofing for new homes, home extensions, carports, garages, covered patios, fencing, fascia and facade work.
(Colorbond® and Zincalume® are registered trademarks of BlueScope Steel Limited)
Minimum Roof Pitch
For roofs with continuous sheets and no end laps the minimum roof pitch is 2 º (1 in 30). To prevent ponding from occurring this minimum pitch must be adhered to at all points of the roof. For roofs with end laps the minimum lap is 200mm for pitches between 2º and 15º and 150mm above 15º. For walls allow maximum end laps of 100mm.
Length
Metroll can supply Metrospan sheeting up to a maximum length of 35 meters depending on availability of delivery. Lengths to be manufactured by Metroll should be site measurements, not those taken off plans.
|
 |
|
Metroclad
The Product
Metroclad 850 is a low rib height, custom length, high tensile steel wall cladding manufactured from .35mm and .42 B.M.T. (Base Metal Thickness) Colorbond® and Zincalume® steel. Because of Metroclad 850's larger cover width it is very well suited to cladding all kinds of building. Fewer laps mean that it is much easier to install. Can be used for any cladding situation, both internal and external.
NB: Metroclad 850 is a wall profile only - it should not to be used for roofing purposes.
(Colorbond® and Zincalume® are registered trademarks of BlueScope Steel Limited)
Dimensions
Metroclad 850 has an overall width of 880mm wide (± 5mm) with a cover width of 850mm (± 5mm), 214mm pan x 13mm rib height. For walls that require the sheets to be end lapped please allow maximum end laps of 100mm.
Length
Metroll can supply Metroclad sheeting up to a maximum length of 6 (longer lengths are available. Please consult your nearest Metroll office for details) meters depending on availability of delivery. Lengths to be manufactured by Metroll should be site measurements, not those taken off plans.
|
 |
|
Metropanel
The Product
Metropanel is a custom length steel wall cladding and is manufactured from G300 .55mm B.M.T. (base metal thickness) Colorbond® and Zincalume® steel for long life. An interlocking panel system for use as cladding, ceilings, fascia, roller doors and as an infill panel, Metropanel can be adapted to almost any cladding use.
(Colorbond® and Zincalume® are registered trademarks of BlueScope Steel Limited)
Length
Metroll can supply Metropanel sheeting up to a maximum length of 9 (longer lengths are available. Please consult your nearest Metroll office for details) meters depending on availability of delivery. Lengths to be manufactured by Metroll should be site measurements, not those taken off plans.
Fixing
- Fix initial trims where applicable.
- Align and fix starter clips using a string line and correct fasteners.
- Place panel tight under starter clips and fix through panel slots.
- Place next panel tight under lug on first panel and fix as in step.
- Repeat until completed and then fix any additional trims to finish off as required.
Accessories
Accessories are available to complete the panel system and can be supplied in either Zincalume® or Colorbond® finishes to match. They are in 4-meter lengths of 0.55mm thickness.
|
 |
|
Mini Corodek
The Product
An Elegant Profile in a Traditional Style
Mini-Corodek is a sophisticated corrugated profile from Metroll Building Products which is suitable for use in exterior and interior applications on straight or curved surfaces.
Its elegant profile is ideally suited for uses such as ceilings and soffit linings, feature walls and partitions, screens and small awnings, not subject to any foot traffic. It can be used with the corrugations vertical or horizontal.
Mini-Corodek is available in a range of attractive colours in COLORBOND® pre-painted steel and in ZINCALUME® zinc/Aluminium alloy coated steel.
NB. Mini-Corodek is not intended to be used as the primary roofing material.
|
 |
|
|
